Install Remote Control Battery; Connecting The Main Unit To The Monitor - Philips TAP4805 User Manual

Install remote control battery

Caution
Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard batteries in re.
Risk of decreased battery life! Never mix different brands or types of batteries.
Risk of product damage! When the remote control is not used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert two RO3 AAA CARBON ZINC batteries 1.5V.
3
Close the battery compartment.

Connecting the main unit to the monitor

1. Connect the supplied AV Cable to the AV Out jack on the main unit and the AV In jack on the
monitor unit.
2. Connect the supplied DC Cable to the DC Out jack on the main unit and the DC In jack on the
monitor unit.
3. Switch the main unit and the monitor on by switching the
4. Audio and video played through the main unit will now be seen and heard on the connected
monitor.
monitor
Button.
main unit
Connect power through the AC adapter