ABB Ability Smart Sensor Technical Document page 6

Make following configuration:
AC Address: abb.cassia.pro
-
Connection Priority: Wireless
-
Change the Wireless operation mode from Hotspot to Client
-
Enter the SSID (name) of the USB WIFI modem network
-
Enter the USB WIFI modem network password
-
IP Allocation: DHCP
-
Press Apply at the bottom of the screen.
Reboot the gateway by removing the power supply and put it back in again.
Wait 30-60 seconds for gateway to boot up.
Connect again to USB WIFI Modem network and go to web page
Go to Statistics tab and find out the new IP address of corresponding gateway MAC
address:
DOCUMENT ID
9AKK107680A2227
© Copyright 2020 ABB. All rights reserved.
Figure 6 Gateway configuration
REV.
A
AB B ABI LIT Y™ SM ART S ENSO R G AT EWAY
DATE
January 2020
http://192.168.8.1
LANG. PAGE
EN 6/8