Panasonic KX-TGB850 Series Operating Instructions Manual page 27

5 Enter the 4-digit PIN code (default = 0000),
press OK .
L R
A beep will be heard if the registration is
successful. The handset is automatically
assigned an available handset number. Use this
number when making intercom calls.
Note:
● If registration is not successful the first time,
please repeat the process again in case the
base unit registration period ran out of time.
If the base unit is not found after about 120
seconds, the handset returns to standby. Try
registering again.
De-registering a handset
A handset can cancel other handsets registered
to the same base unit. This allows the handset to
end its wireless connection with the system.
Handset / Base unit
d
1 Menu , "Advanced set", press
L R L R
d
2 "Deregister", press
L R
3 Enter the 4-digit PIN code (default = 0000),
press OK .
L R
d
4 to select the handset that needs to be
L R
de-registered, press
beep will be heard and the display will return
to standby.
Restore default settings
The phone can be restored to its default (original)
settings. All the handsets that are registered to
the base unit will be retained.
IMPORTANT
Current handset and base unit settings will be
reset. Some contents will be retained even if you
reset the phone setting. See "Default settings by
reset" for details.
Handset / Base unit
d
1 Menu , "Advanced set", press
L R L R
d
2 "Reset", press
L R
3 The display shows "Confirm?".
4 Proceed with the operation for your unit.
Handset: OK to confirm or
L R
standby.
Base unit: OK to confirm or
L R
to return to standby.
The phone will restart automatically.
For assistance, please visit http://shop.panasonic.com/support
L
OK .
L R
OK . A confirmation
L R
L
OK .
L R
OFF to return to
L R
EXIT/STOP
L
Default settings by reset
Phonebook
Speed dial
Ring volume (Handset)
Ring volume (Base unit)
Ring tones
*1
Silent mode
*1
Silent mode
*1
Silent mode
*1
Key tone
Docking tone
Battery tone
*1
Handset name
Date & time
Language
OK .
R
Auto answer
Auto hang-up
Alarm
*1
Call block (Unknown call)
Call block (Block mode)
Call block (Block number)
Area code
Flash time
Dial mode
Auto clock
Change PIN
Caller list
Redial list
Receiver/speaker volume
(Handset)
OK .
R
Receiver/speaker volume
(Base unit)
Handset equalizer
Answering system
Answering mode
R
Greeting message
Recording message
Programming
Unchanged
Unchanged
5
5
1
Off
(Start time) 08.00PM
(End time) 08.00AM
On
On
*1
On
Unchanged
*1
Unchanged
English
Off
*1
On
Off
Off
Off
Unchanged
Empty
700ms
Tone
Unchanged
0000
Unchanged
Unchanged
3
3
Alto
*1
On
Record also
Use default
Unchanged
27