English - Edimax EU-4206 Quick Installation Manual

English

Introduction
Thank you for purchasing the USB2.0 10/100Mbps to Fast Ethernet Adapter. This
unique cable adapter allows you to connect your computer into Internet in the fast and
easy way.
Specifications
Standards
IEEE 802.3 10Base-T and 802.3u 100Base-TX Compliant
USB specification 1.0 /1.1 and 2.0 compliant
Connection Mode
Full or Half duplex for both 10Mbps and 100Mbps
Media Supported
Category-3, 4, 5 for 10Base-T and Category 5 for 100Base-TX
LEDs
Link/Active LED indicator
Feature
USB specification revision 1.0/1.1 and 2.0 full speed compliant
Complies with IEEE 802.3 10Based-T and 802.3u 100Base-TX
USB interface to desktop/notebook PC without power adapter
RJ-45 connector to 10Mbps or 100Mbps Ethernet networks 10/100Mbps Auto-Sense
Full/Half Duplex auto-negotiation for both 10Base-T and 100Base-TX
Compatible with Windows 98SE / ME / 2000 / XP
Device Installation Guide
Follow the steps below on installing the USB2.0 10/100 Fast Ethernet adapter cable:
Step1.
Please connect the male B-connector of 1.5M USB2.0 cable to the female USB
B-connector of USB2.0 Fast Ethernet Adapter and RJ-45 connector of networking cable
to another end of USB2.0 Fast Ethernet Adapter.
Step2.
Connect the male A-connector of 1.5M USB2.0 cable to an available USB2.0 port on
the computer or an available USB2.0 port on the USB2.0 HUB plugged into the
computer.
4