Table of Contents
Advertisement
Capture Video
1. The default mode is the "CAPTURE" mode. Click the play
button on the DVMovie interface and your camcorder will go
into play mode and video can be previewed on your computer
monitor.
2. Click the "Record" button and type in a le name for your
video clip. Click OK. You are in standby mode. In standby
mode you can advance the tape to the section you wish to
record. Click "Record" as second time and you begin record-
ing. There is no video preview while you are recording. An
indicator shows you the amount of hard disk space you have
used for capture.
3. Click "Record" or "Stop" button to stop capture.
4. Captured Video can be imported into Media Studio Pro 6.0 or
Adobe Premiere.
Video Playback
When you capture video you will notice that you can choose 4 video
types (AVI, Direct Show AVI, QuickTime DV, RawDV). These types
allow you to capture video for different types of editors or video
applications. ONLY .AVI will playback directly on the NT4 system.
To play back other le types you need to install the proper video
player software.
QuickTime DV: If you have QuickTime4 installed the
QuickTime(included in Media Studio Pro). DV will playback in the QT
player. If you use QuickTime 4 Pro you will have additional DV
stream controls.
Direct Show Video: If you install Microsoft Media Player 6.4
(Included in Media Studio Pro) or later, you will be able to playback
DV captured in the Direct show format.
Raw DV: There is currently no player for this le type so we do not
17
Advertisement
Table of Contents
