ADS Technologies API-400 User Manual page 12

Step 5
Locate an available PCI expansion slot.
This will be in the area of your computer
where other cards that look similar to the
PYRO PCI card are installed.
Step 6
Visually conrm that the PYRO PCI Card
will fit into the available slot you have
chosen.
Step 7
If necessary, remove the knockout on the
back of your computer which corresponds
to the PCI slot you have conrmed as your
selection. If there is a screw, place it in a
safe place as you will be using it to attach
the PYRO PCI Card.
Step 8
Push the PYRO PCI Card rmly into the
PCI slot. Apply pressure as needed (but
do not force the card) until the edge
connector is completely sealed.
12