PIONEER DJ DDJ-400 Audio Setup Manual page 3

Hide thumbs Also See for DDJ-400:

Prior to use (important)

・ Download djayPRO for Mac from the App Store. (paid feature)

https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12

・ If you already have djayPRO for Mac installed, update it to the latest version.

・ If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male

to USB-A female cable (sold separately).

・ Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.

Precautions

djayPRO for Mac is a DJ software made by Algoriddim GmbH. Refer to the Algoriddim website for the app.

https://www.algoriddim.com/

The URL listed in this guide is as of June 2019 and are subject to change.

System requirements

Supported operating systems:

USB port:

Internet connection:

For information on the latest system requirements, compatibility and supported operating systems, visit the App Store.

https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12

Turn the power on.

First, turn on your Mac. Then, turn on the power of all connected devices such as speakers with built-in

Check the audio device settings

After launching djayPRO for Mac, follow the instructions below to confirm that the unit is recognized as an audio device.

1. Click [

] on the top-left corner of the screen and open [Audio Device Setting].

2. On the Devices screen, check that the settings are as follows.

macOS Mojave 10.14, macOS High Sierra 10.13, macOS Sierra 10.12, OS X 10.11 (latest update)

Your Mac must have a USB 2.0 port to connect with the unit.

You'll need an internet connection for downloading the software and streaming.