PIONEER DJ DDJ-400 Audio Setup Manual page 2

Connecting to a Mac
Speakers with built-in
amplifiers*1,*2
RCA audio cables are not supplied
*1
with the unit.
Adjust the volume of the device* connected
*2
to the [MASTER] output until you have
a volume level you're happy with.
*Speakers with built-in amplifiers, etc.
The [MIC] input supports
*3
only unbalanced input.
If you don't use a microphone, minimize the volume level
*4
using the [MIC LEVEL] knob.
Be sure to use the supplied USB cable
*5
for constant high-level performance.
If your Mac has only a USB Type-C port, you'll need
to use a USB Type-C male to USB-A female cable (sold separately).
USB cable (supplied)
Microphone
*5
*3,*4
Mac
1
Headphones