Harken 3195 Instructions

Telephone: (262) 691-3320 • Fax: (262) 691-3008 Web: http://www.harken.com • E-mail: harken@harken.com
WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com/manuals for additional safety information.
1
4
3
6
6
2
Loop Block Replacement Part Numbers
Part Sheave Sideplate
No. Ø A
3195 57mm H-43623
3196 75mm H-43456
3199 100mm H-43757
3201 125mm H-43814
Part Sheave Roller Cage
No. w/Side Balls Assembly
3195 H-21635B HBB85
3196 H-21550B HBB86
3199 H-22123B HBB87
3201 H-23750C HBB88
Part Dead-End
No. Screw Post
3195 HFS796 H-43625
3196 HFS806 H-43461
3199 HFS816 H-43759
3201 HFS814 H-43816
I N S T R U C T I O N S
3195, 3196, 3199, 3201
1251 East Wisconsin Avenue • Pewaukee, WI 53072 U.S.A.
Parts
1) Head
2) Sideplates
3) Sheave
4) Dead-End Post
5) Block Mouth
6) Screw
7) Allen Wrench
8) Blue Loctite
®
7
5
8
Sideplate
B
H-43624
H-43457
H-43758
H-43815
Sideplate A
Loop Block
Maximum Working Load
Part Sheave
No. Ø
3195 57mm 2500
3196 75mm 5,000
3199 100mm 7,500
3201 125mm 11,000
Loop and/or High Strength Lashing Line
Refer to chart above and choose loop and/or high strength lashing that
matches or exceeds break strength (BS) of block. Note: See chart for
maximum line diameter that will fit through mouth.
WARNING! Webbing or smaller lashings can be damaged by being
pinched between post and sideplate. Damaged webbing or lashings
can part suddenly under load. Use only loops when terminating at
dead-end post.
WARNING! Knots weaken line considerably. Consult qualified rigger
or line manufacturer for advice on securing line. Use high strength
loops or consult rigger for recommendations on lashing. Using the
wrong line or securing the line improperly can cause an accident.
Small Control Line Included
4' (1.2 m) line included for lashing to head.
Block Replacement
Part No. Part No.
3195 HCP1438
3196
HCP1419
Dead-End
Post
Roller Cage
Assembly
= Incorrect. Avoid to prevent accidents.
Specifications
Breaking Load
(MWL) (BL)
lb kg lb
1134 5,000
2,268 10,000
3,402 15,000
4,990 22,000
You Must Supply
Line Block Replacement
Length Part No.
2 mm 3199
3201
2.5 mm
Sideplate B
Sheave
Max line Ø
that fits
kg through mouth
2268 5mm
4536 8mm
6804 11mm
9977 14mm
Line
Part No. Length
HCP1419 2.5 mm
HCP392 3 mm
Screw