Stepper motor-driven diaphragm dosing pump NXP-M and NXP-P
15 Delivery characteristic curves
This Chapter is intended to give you an idea of the delivery capacity that
the dosing pump can achieve at specific back pressures. These delivery
capacities were determined on the manufacturer's test stands. They
apply at 68 °F for water, at 100 % stroke frequency. The delivery capacity
depends on the medium (density and viscosity) and temperature. Since
these conditions vary at every installation location, you should calibrate
the dosing pump.
9.2 gph
NXP-M810
7.9 gph
6.6 gph
5.3 gph
4.0 gph
2.6 gph
1.3 gph
0,00 gph
0 psig
Fig. 37: Delivery characteristic curves NXP-M/P 68 through 810
Delivery characteristic curves
40
Dosing head spare parts kits including valves
NXP-M540
NXP-M375
NXP-M285
73 psig
145 psig
NXP-M140
NXP-M68
218 psig
290 psig
Operating instructions
363 psig
Pressure [psig]