Side Panel Installation (Optional, Wall Mount Installation Only) - Napoleon Alluravision Series Installation And Operation Manual

installation
EN
7. Install 2 screws through the side wall mounting brackets (supplied) to secure the appliance to the wall (Fig.
2-2). Repeat on the opposite side.
Wood Screw (A x 1 each side)
Metal Screws (C x 2 each side)
8. Install side panels (see "side panel installation" section).
9. Place the crystals or optional topaz glass chips and driftwood logs (CHD-1 models only) along the media tray
(see "crystal ember installation" and "optional topaz glass chips and driftwood log installation" sections).
10. Install front glass (see "front glass installation and removal" section).
note:
For NEFL42/50CHS/D-1 models, there is only 1 wall bracket attached to the back of the appliance.

2.3.1 side panel installation (optional, wall mount installation only)

1. Install left and right panels (Fig. 2-3) by securing 4 screws (2 per panel) to bottom of appliance (Fig. 2-4).
12
W415-2841 / D / 11.25.20
Side Wall Mounting Bracket
Fig. 2-2
Fig. 2-3
Fig. 2-4