Advertisement
Table of Contents
WARNING:
FALL HAZARD-To prevent death or serious injury from falls, always keep child within arms reach. NEVER LEAVE CHILD
UNATTENDED and always use restraining system.
This changing system is intended for using with children weighing up to 30 lbs.
AVA CHANGING TABLE TOPPER will be used with AVA CABINET, with size 40"W x 18"D x 35"H. Cushion Pad size is
32"W x 16"D x 4"H
Parts Included :
Ava Cabinet [1]
Ava changing table topper [2]
Steel connecting plates [3]
Product side mounting screws [4]
Plastic mounting bracket [5]
Nylon zip tie
Stud mounting screws [6]
Instructions to fit the Ava Changing Table Topper to the Top of The Ava Cabinet.
1.
Locate 4 pre-drilled holes on the top back side of the Ava Cabinet and align with 4 pre-drilled holes in Ava Topper.
2.
Screw 2 steel connecting plates into the pre-drilled holes using 8 screws provided.
3.
Follow instructions Anti-Tip kit next page to secure this unit to the wall.
RESTORATION HARDWARE
AVA CHANGING TABLE
ASSEMBLY INSTRUCTIONS
25mm
1pc
1pc
2pcs
12pcs
4pcs
2pcs
4pcs
45mm
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for baby&child AVA
Summary of Contents for baby&child AVA
- Page 1 Instructions to fit the Ava Changing Table Topper to the Top of The Ava Cabinet. Locate 4 pre-drilled holes on the top back side of the Ava Cabinet and align with 4 pre-drilled holes in Ava Topper. Screw 2 steel connecting plates into the pre-drilled holes using 8 screws provided.
- Page 2 RESTORATION HARDWARE Instructions to fit anti-tip kit Locate a wall stud behind your furniture piece. Position a bracket on the stud approximately 1" below the top of the furniture. Mark and drill pilot hole into the center of the stud with a 3/32" drill bit. Attach a bracket to the stud with the long screws provided.
- Page 3 RESTORATION HARDWARE DETAIL C WALL FURNITURE Thank for your purchase www.rhbabyandchild.com Page 3 of 3...
Need help?
Do you have a question about the AVA and is the answer not in the manual?
Questions and answers