TechniSat DiGYBOXX T4 VA Operating Manual page 150

For daily use
Turning on and off
> Press the On/Standby button on the remote control or the unit to switch the digital
receiver on.
> Press the key once again to switch the unit off again.
Programme selection
Using means of the programme up/down keys
> Use the up/down programme keys on the remote control or the unit to switch
the programme up or down by one place.
Using the numeric keyboard
> Use the numeric keyboard to enter the number of the programme that you want
For example:
1
1, then 4
2, then 3,
If you are entering a multi-dogit programme number you have approx. 3 seconds after you
have pressed a button to complete the entry.
Using the programme list
> Press the OK button.
> Use the up/down arrow keys to mark the programme you want.
> Press the OK button to set up the programme that you marked.
Us the up/down arrow eys to move the marker by one line and use the left/right
arrow keys to move to the next page in the list.
Volume control
> Your digital receiver's volume can be controlled using the Volume + button to
increase the volume and the Volume - button to decreas it.
> Press the Sound On/Off button to switch the sound on or off.
Switching between TV / Radio
> Press the TV/Radio button to switch between TV and radio mode.
for programme position 1
for programme position 14
then 4 for programme position 234
50