Table of Contents
Advertisement
Step 1. Configure your network
You can use one single network or two separate networks for streaming and control (for more see section
Setup). In both cases, you need to configure the following in each network:
DNS
The system needs a single SRV record of _mcal._tcp per network:
Service Name
_mcal._tcp.yourdomain.com
•
Replace "yourdomain.com" with your own domain
•
The target hostname "mc-manager" can be replaced with any hostname you want to give to the
MobileConnect Manager
•
Use FQDN and not a direct IP address
DHCP
The following DHCP settings are required so that the MobileConnect Apps can discover the MobileConnect
Manager:
•
For Android → configure the "domain part" of the DHCP protocol
•
For iOS → the "domain part" has to be in the search domains
Step 2. Configure your WiFi
Configure traffic prioritization on your Access Points:
•
streaming uses DSCP EF value
•
control uses DSCP CS3 value
Without prioritization you cannot achieve good audio quality and low latency.
We strongly advice not to use MobileConnect without it.
Version 1.0
TTL
Class
Type
Priority
3600
IN
SRV
0
MobileConnect User Guide
Weight
Port
Target
mc-manager
0
8000
.yourdomain.com
Network
5
Advertisement
Table of Contents
