Related Manuals for Silencer 53SL
Summary of Contents for Silencer 53SL
- Page 1 USERS MANUAL This unit is designed for professional installation only. For Warranty Information: Please visit our website at www.magnadyne.com...
-
Page 2: Table Of Contents
Contents CHANGING THE BATTERY ............................. 3 4-BUTTON REMOTE TRANSMITTER OPERATION ......................3 2-BUTTON REMOTE TRANSMITTER OPERATION ......................4 CHIRP INDICATORS ................................ 4 PARKING LIGHT ................................4 DOOR LOCKING ................................4 Silent Door Locking ................................4 DOOR UNLOCKING .................................4 Silent Door Unlocking ..............................4 Pathway Illumination ..............................4 Two-Steps Door Unlock ..............................4 PANIC FUNCTION ................................4 VALET MODE ..................................5... -
Page 3: Changing The Battery
REMOTE CONTROL TRANSMITTER A. CHANGING THE BATTERY Both transmitters are powered by one CR2032 Battery. To replace the battery, use a coin or small flat blade screwdriver to carefully pry apart the case at the notch provided. B. 4-BUTTON REMOTE TRANSMITTER OPERATION Transmitter System Function Remark... -
Page 4: 2-Button Remote Transmitter Operation
C. 2-BUTTON REMOTE TRANSMITTER OPERATION 2-Button System Function Remark Transmitter Lock Doors Press the Lock button and 1 LED flash Activate or Deactivate the Remote Start Press and hold for 1.5 seconds and 2 LED flashes. Activate or Deactivate the Panic. Press and hold for 3 seconds and 3 LED flashes Unlock Doors Tap the Unlock button for a half second... -
Page 5: Valet Mode
H. VALET MODE When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the system from remote starting. Enter Valet Mode: 1. Under the system unlocked, turn the ignition to “ON/ OFF/ ON” position. 2. -
Page 6: To Remote Start The Vehicle
B. Programmable Safety Start (For 4-button transmitter only) By default, your Silencer remote starter is programmed to start/stop after pressing the button 1 time. This default setting can be re-programmed to require 2 presses This setting is known as “Child Safety Mode”. -
Page 7: Running Time Extender
Running Time Extender (For 4-button transmitter only) User Programmable Run Time / Run Time Extension. The system has the ability to allow the user to extend the time the vehicle will be running under control of the remote start. This will only extend the run time back to the current run time setting during the current remote start cycle. -
Page 8: Shutdown Diagnostics
G. Disabling Remote Start System: (If Installed) This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the optional remote start enable toggle switch to the “OFF”... - Page 9 SILENCER LIMITED LIFETIME WARRANTY Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.
- Page 10 Magnadyne Corporation 1111 W. Victoria Street Compton CA 90220 (310) 735-2000 Please visit our website at www.magnadyne.com Made in Taiwan. All Rights Reserved...