Related Manuals for Silencer 55SL
Summary of Contents for Silencer 55SL
- Page 1 USERS MANUAL This unit is designed for professional installation only. For Warranty Information: Please visit our website at www.magnadyne.com...
- Page 2 2-WAY LCD REMOTE CONTROL - SLRF90 A. CHANGING THE BATTERIES BATTERY REPLACEMENT: SLRF90 The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to indicate the power is back up on the transmitter.
- Page 3 B. STANDARD LCD ICON CONFIGURATIONS The lock icon will be displayed The unlock icon will when the doors are locked be displayed when the doors are unlocked Valet Mode Driver paging All the functions shall be Someone is paging temporarily on hold you from your vehicle Hood Trigger...
-
Page 4: Remote Transmitter Operation
OPERATION C. REMOTE TRANSMITTER OPERATION: Transmitter System Function Remark Button Lock Doors & Arm System Press and hold for 3 seconds. Press Trunk Panic Function button to stop panic function. Car Locator Press when in armed mode. Silent Lock / Unlock Press at the same time. - Page 5 WARNINGS As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. • Keep the transmitter out of children’s reach. • Do not leave anyone in the vehicle while running on remote control. •...
- Page 6 H. VALET MODE VALET MODE: (System is in Disarm Mode) The valet switch allows you to temporarily bypass all functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all functions and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain operational.
-
Page 7: Remote Start Operation
4. The gear selector is in any gear other then “PARK” or “NEUTRAL”. PROGRAMMABLE SAFETY START (Child safety mode) By default, your Silencer remote starter is programmed to start/stop after pressing the button 1 time. This default setting can be re-programmed to require 2 presses of the button to remote start/stop the vehicle. -
Page 8: To Turn Off The Remote Start
D. TO TURN OFF THE REMOTE START When the engine is running (by remote start) and you want to stop it; 1. Press button once on the remote transmitter under the remote start mode. 2. Move the optional remote start enable toggle switch to “OFF” position. (If installed) 3. - Page 9 ADVANCED USER’S MODE LCD REMOTE CONTROL PROGRAM SETTINGS Table 1: Pre-Arm Settings ENTER: Press & hold “ F “ button until one beep is heard then release F-button. Next, press F button within 5 sec. to move forward to the feature option you want to program. LCD Display Indicator Button Button...
-
Page 10: Status Check
Table 2: System Check Functions ENTER: Press & hold “ F “ button until 2 beeps are heard then release F-button. Next, press “F” button within 5 sec. to move forward to the feature option you want to program. LCD display Indicator Button Button Press and hold the... - Page 11 Alarm Clock set up 21 2 Default is OFF Press button = (+) or Adjust Alarm Clock 12 :00 Press button = (-) 12 is flashing hours from 0 to 12 Press button confirm the selection, move to the minutes setting. Press button = (+) or Adjust Alarm Clock...
- Page 12 Function Indicator 21 5 Default is Buzzer Setting Transmitter confir- Press button = Melody (3 presses = both) mation by melody or Press button = Vibration (3 presses = both) vibration or both Press button confirm the selection, move to next option (21 6).
-
Page 13: Timer Start
Icon Off = Disable E. TIMER START: Timer Start: Your Silencer System can be programmed to start and run the engine every 3 / 2 hours depending on the initial setup programming (Default timing is 3 hours). IMPORTANT: Timer Start should be used only in open areas, never start and run the vehicle in an enclosed space such as a garage or carport. - Page 14 Table 5: Return All Transmitter Settings and Programming to the default settings Enter: Press & hold “ F “ button until 4 beeps heard, release F-button. LCD display Button Button Press and hold 3 – 1 Press & hold button for Button until 2 seconds to return all settings 4 beeps sounded...
- Page 15 SILENCER LIMITED LIFETIME WARRANTY Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.
- Page 16 Magnadyne Corporation 1111 W. Victoria Street Compton CA 90220 (800) 340-3200 www.magnadyne.com Please visit our website at Made in Taiwan. All Rights Reserved...