Grange FLOWER WALK PERGOLA Assembly Instructions

Step 12
Take one of the Metal Rods (3) with the
70mm thread and fix it to one of the end
curved beam assemblies
.
(as shown in fig.6)
Tighten bolt (e) using a 17mm socket.

STEP 13

Fit metal rods to the remaining six holes
for the circle assembly as in step 12.

STEP 14

Fit Washers (a) to the threaded ends of the
metal rods.

STEP 15

Fit the next circle assembly over the
protruding 70mm threads.

STEP 16

Fit a Washer (a) and a metal rod (4) with
the 60mm thread to each of the threads
protruding through the circle assembly.
Tighten the rods in place as tight as
possible.
TIP
Keep working around the rods in turn to
tighten them.

STEP 17

Fit washers to the metal rod threads and
then fit the remaining circle assembly.

STEP 18

Fit washers to the protruding threads
before fitting a Plastic Cup (b) and M10
nut (d).
Tighten the nuts using a socket as before
as tightly as possible.

STEP 19

Using the dimensions of the completed
structure, mark the positions for the
anchors (h or j).
Step 20
Fix the anchors into position then lift the
structure into place in the anchors.
Ensure the structure is aligned correctly.
Using screws (f) fix the structure into the
anchors.

STEP 21

Once the structure is fixed in its final
position and securely fastened down, fit
the caps (c) to the plastic cups.
NB. Once the caps are fitted they
cannot easily be removed without
incurring damage.

CARE OF YOUR PERGOLA

THE GRANGE FLOWER WALK PERGOLA IS MADE OF PRESSURE
TREATED AND FSC CERTIFIED TIMBER AND AS SUCH IS GUARANTEED
AGAINST ROT FOR A MINIMUM OF 15 YEARS. HOWEVER, IT MUST BE
REMEMBERED THAT AS A NATURAL PRODUCT, TIMBER IS SUBJECT TO
MOVEMENT AND WEATHERING AS IT SEASONS. IT IS NOT
UNCOMMON FOR SMALL SPLITS TO OCCUR WHEN DRYING AND
WARPING WHEN TIMBER IS ALLOWED TO DRY TOO RAPIDLY. THESE
WILL NORMALLY GO BACK WHEN HUMIDITY RISES. IT IS NATURE AT
WORK AND NOT CONSIDERED A FAULT.
ITS COLOUR WILL ALSO CHANGE WITH TIME. A RETREATMENT, AS
REQUIRED WITH A PROPRIETARY WOOD TREATMENT IS
RECOMMENDED.
b

STEP 12-13

e
a
3
1
(fig.6)
STEP 14-17
STEP 18
d
4
c
b
a
1

STEP 20

2
Position and fix
all anchors (h or j)
before inserting
structure into them
f
f
c
PERGOLA
1
h
or
j
2.58m
FLOWER WALK
Assembly Instructions
2.175m
820mm
1.12m
TOP VIEW FRONT VIEW
GRANGE FENCING LIMITED
Halesfield 21, Telford TF7 4PA
Tel: 01952 588088 Fax: 01952 581522
Email: sales@grangefen.co.uk
Web: www.grangefen.co.uk