Table Of Contents; Introduction - Husqvarna 122HD45 Operator's Manual

Introduction..................................................................... 4
Safety..............................................................................5
Operation........................................................................ 8
Maintenance................................................................. 10
Product overview
(Fig. 1)
1. Choke control
2. Air purge bulb
3. Spark plug cap and spark plug
4. Front handle
5. Rear handle
6. Throttle trigger lockout
7. Stop switch
8. Fuel tank cap
9. Throttle trigger
10. Handle lock
11. Fuel tank
12. Gear housing
13. Lubricant filler cap, gear
14. Air filter cover
15. Starter rope handle
16. Cylinder cover
17. Hand guard
18. Blade and blade guard
19. Transport guard
20. Combination wrench
21. Tube of grease
22. Operator's manual
Product description
The product is a hedge trimmer with a combustion
engine.
Intended use
Use the product to cut branches and twigs. Do not use
the product for other tasks.
Symbols on the product
(Fig. 2) WARNING! This product is dangerous.
Injury or death can occur to the operator or
4
Contents
Troubleshooting............................................................ 12
Transportation, storage and disposal........................... 13
Technical data.............................................................. 13
EC Declaration of Conformity....................................... 15

Introduction

(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
yyyywwxxx
x
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Euro V Emissions
bystanders if the product is not used
carefully and correctly. To prevent injury to
the operator or bystanders, read and obey
all safety instructions in the operator's
manual.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
The product agrees with the applicable EC
directives.
The rating plate shows serial number. yyyy
is the production year and ww is the produc-
tion week.
WARNING: Tampering with the engine voids
the EU type-approval of this product.
994 - 007 - 08.09.2020