Trouble Shooting - Grizzly AKHS 18-45 Translation Of The Original Instructions For Use

GB

Trouble shooting

Problem
Appliance won't
start
Intermittent opera-
tion
Much vibration
Loud noise
Inferior cutting
performance
88
Possible cause
Battery ( 7)
discharged
Battery ( 7) not in
On/Off switch (
defective
Motor defective
Internal loose contact
On/Off switch (
defective
Motor defective
Incorrectly mounted cut-
ting garnish
Cutting accessory blunt
Cutting accessory dam-
aged
Chain tension insufficient Check chain tension
Battery ( 7) not fully
charged
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
9)
Send in to Service Centre for repair
Send in to Service Centre for repair
9)
Send in to Service Centre for repair
Mount cutting garnish correctly
Let sharpen cutting accessory or re-
place
Replace cutting accessory
Recharge battery (see „Charging")