About This Guide - 3Com SuperStack 3C16071B User Manual

A
BOUT
This guide describes how to install the SuperStack
Redundant Power System (RPS) and use it to provide redundant and
resilient power supplies for your SuperStack units.
The guide is intended for use by network administrators who are
responsible for setting up network equipment; consequently, it
assumes a basic working knowledge of LANs (Local Area Networks).
CAUTION: The Type 3 DC Power Module is for installation by suitably
qualified service personnel only. Refer to the Type 3 Power Module
Installation Guide.
This guide explains:
How to install the Advanced RPS.
How to set up the Advanced RPS to provide the power supply
protection you need.
This guide does not show you:
How to manage the Advanced RPS.
How to install other SuperStack products.
If release notes are shipped with your product and the information
there differs from the information in this guide, follow the
instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the 3Com
World Wide Web site:
http://www.3com.com/
T G
HIS UIDE
®
3 Advanced