SAGEMCOM Swan F5366s User Manual page 17

Field
Hostname
IP Address
Subnet Mask
Enable
IPv4 Pool Start
IPv4 Pool End
Restore Default
DHCP Configuration
eir fibre box User Manual
Name assign to your Gateway.
Enter the address of your local network.
Enter your network's subnet mask.
Press the button ON/OFF to activate or deactivate your
gateway's DHCP server.
Note: When ON, you must configure your computer as DHCP
client and DNS client (or enter the primary and
secondary DNS server addresses).
Note: When OFF, you must configure your computer with the
parameters appropriate to your local network (Fixed IP
address, subnet mask and default gateway) as well as
enter the primary
addresses.
Enter the first address attributed by your gateway's DHCP
server.
Enter the last address attributed by your gateway's DHCP
server.
Click on the Restore button to go back to default parameters
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Action
and secondary DNS
Default value
mygateway
192.168.1.254
255.255.255.0
ON
server
192.168.1.1
192.168.1.254
Page 17