Advertisement
・ Software upgrading process will begin. During the Firmware upgrade, TV receiver will display
"Upgrade is going, Please wait..."as shown in figure‐6.
IMPORTANT: During the upgrade a procedure, do not unplug the powers or press
7
Upon completion of the firmware upgrade a message will be displayed on the screen indicating,
"Upgrade has completed successfully! Reboot now 4s" as shown in figure‐7.
・ Blu‐ray player will reboot automatically and afterwards the Initial Wizard will be displayed as shown in
Figure‐8. Follow the instructions on the screen and consult the owners manual for initial setup settings.
Copyright 2011 TOSHIBA CORPORATION All Rights Reserved
Any remote buttons until the upgrade process is finished.
Figure‐6
Figure‐7
Figure ‐8
Page 3 of 3
Advertisement
