3Com SuperStack 3 3C17204 Getting Started Manual page 21

Feature
Simple Network Time
Protocol (SNTP)
SSH v2
Syslog
RADA
SNMP v1 and v2c
SNMP v3
Local Authentication
To make Advanced Traffic Prioritization, RADIUS Based Auto QoS
Assignment, and Traffic Shaping available on the SuperStack 3 Switch
4400 SE, upgrade the product to the Switch 4400 SE Enhanced Software
Upgrade (3C17207).
If you initialize a Switch unit by selecting System > Control > Initialize in
the Web interface or by entering system control initialize in
the Command Line Interface, the following settings are retained to allow
you to connect to and manage the Switch:
IP Address
■
Subnet Mask
■
Default Router
■
Switch 4400
Disabled
Enabled for all security levels
The switch will generate a unique host key
■
when it is first powered up
Client Authentication set to
■
Username/Password
Null public keys for each default users
■
Default host key length 1024
■
Public key ftp sever IP address 0.0.0.0, NULL
■
filename
Cipher: DES
■
Disabled
Disabled
Re-authentication time 1800 (30 minutes).
■
Hold-off (re-try) timer 60 (1 minute)
■
Secondary mode (of authentication) disabled
■
Enabled
Enabled
User: admin,
■
Level: noAuthNoPriv (i.e. no keys)
User: monitor and manager:
■
Level: authNoPriv, no default keys set
Disabled
Default Settings 21