Methods Of Managing A Switch; Command Line Interface Management - 3Com SuperStack 3 3C17204 Getting Started Manual

Methods of
Managing a Switch
Command Line
Interface
Management
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See
Managing a Switch"
If you do not intend to use the command line interface via the console
port to manage the Switch, you can logout, disconnect the serial cable
and close the terminal emulator software.
Once you have completed the initial set up of your Switch, you can
decide how you wish to manage the Switch. You can use one of the
following methods:

Command line interface management

■
Command line interface management using SSH
■
Web interface management
■
SNMP management
■
Each Switch has a command line interface (CLI) that allows you to
manage the Switch from a workstation, either locally via a console port
connection (see Figure
Figure 16 CLI management via the console port
Figure 17 CLI management over the network
Refer to "Setting Up Command Line Interface Management"
page 49.

Methods of Managing a Switch

on page 47.
16), or remotely over the network (see
47
"Methods of
Figure 17).
on