Symbols - Craftsman 125.21417 Operator's Manual

Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SYMBOL
V
A
Hz
W
min
Alternating Current
C lass II Construction
.../min
Wet Conditions Alert
R ead The Operator' s Manual
Keep Away From Water
Keep Away From Fire
No-Hands Symbol
Lithium-Ion Battery Recycling

SYMBOLS

NAME
Volts
Amperes
Hertz
Watt
Minutes
Direct Current
No-load Speed
Per Minute
Eye protection
Safety Alert
Heat Alert
Hot Surface
Recycle Symbol
6 ― English
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
R otational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed,
orbits, etc., per minute
Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
read and understand operator' s manual
before using this product.
Always wear eye protection with side
shields marked to comply with ANSI Z87.1.
Precautions that involve your safety.
Do not dispose of battery packs in
rivers or immerse in water.
Do not dispose of battery packs in
explode or leak and cause injury.
Do not expose battery packs to heat
in excess of 60ºC.
Failure to keep your hands away from the
blade will result in serious personal injury.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Designates that this tool is in compliance with
lithium-ion battery recycling program requirements.
This product uses lithium-ion batteries. Local, state,
or federal laws may prohibit disposal of batteries in
ordinary trash. Consult your local waste authority
for information regarding available recycling and/or
disposal options.