Polaris PRO HD 4500 WINCH KIT Quick Start Manual page 7

TORQUE
16ft. lbs. (21.7 Nm)
5. Install the autostop fairlead mounting bracket to
the front suspension bracket
X
bracket using four screws
Torque to specification.
TORQUE
20ft. lbs. (27.1 Nm)
W
and chassis
k 2@
and nuts .
Instr 9927473 Rev 01 2016-12
6. Feed the winch rope
f
bracket , autostop fairlead
h
as shown. Install winch hook
clevis and cotter pin. HINT: Attach a plastic cable
tie to the end of the rope and feed the cable tie
through the rubber stop. Use a little wax or other
mild lubricant on the rubber stop and pull the rope
through the rubber stop using the plastic cable tie.
CONTACTOR INSTALLATION
1. Align contactor mounting holes with existing four
Z
holes on firewall and install contactor
firewall using four screws
do not overtighten.
w
2. Connect blue , yellow
cables to the contactor terminals as shown and
torque nuts to specification.
Page 7 of 13
i
through fairlead mounting
s
, and rubber stop
y i
to rope
i
on
y
. Tighten until snug but
q r
, red , and black
using
e