Polaris PRO HD 4500 WINCH KIT Quick Start Manual page 5

6. Remove the center console
L
screws and five push darts
7. Remove the plastic winch cover
P
two screws . Discard the plastic winch cover and
screws.
8. Disconnect the headlight connectors
sides of vehicle.
K
by removing two
M
.
N
by removing
Q
on both
Instr 9927473 Rev 01 2016-12
9. Remove front fascia
supporting to radiator shroud and ten screws
supporting to chassis and body panels.
POWER CABLES KIT INSTALLATION
1. Route the power kit cables (red and black)
battery to bus bar terminals following main wire
harness as shown. Do not connect power cables
to battery and bus bar terminals at this time.
Page 5 of 13
R
by removing six screws
2#
S
T
from