Sing The Central Configuration Manager; Discovering Nj200 Devices On Your Network - 3Com IntelliJack NJ200 User Manual

4
Discovering NJ200
Devices on Your
Network
U
SING THE
C
ENTRAL
You should use the Local Configuration Manager to initialize each of the NJ200
Network Jacks installed on your network. Once you have completed that step, you
can manage all of them with the Central Configuration Manager.
Install this program on any computer on your network you want to use as a
central management console (See chapter 2, "Installing the Configuration
Managers" for help). You can use the same machine that has your SNMP-based
management platform. The Central Configuration Manager will be able to
configure and manage all of the Network Jacks that reside on your network.
In order to manage the NJ200 Network Jacks on your network, the Central
Configuration Manager needs to include them in its database. The easiest way to
add new NJ200 Network Jacks to the database is to use the device discovery tool
included in the Central Configuration Manager. The first time you run the Central
Configuration Manager, it will automatically take you to the Discovery window as
shown under step two below. To discover devices on your network, run the
following steps:
1 Open the Central Configuration Manager by double-clicking on the NJ200 Central
Config Mgr desktop icon. When it launches, you will see a window similar to this
one:
C
ONFIGURATION
M
ANAGER