Designated Emergency Lights Do Not Light With Ac Power (Cablite® Vr W/Dimming And Emergency) - ECI CabLite VR Series Installation Manual

Cablite® VR LED Lighting System Installation Manual Rev 2.1
3) With no AC power applied and battery connected, check for correct battery voltage (6 or 12VDC) at
pins 7 and 8 (+EM-) of control board
a) If no or incorrect voltage present, check connections between battery and control board.
i) NOTE that battery may not be fully charged.
b) Check for correct Battery voltage and replace battery in necessary.
9.5 Designated Emergency Lights Do Not Light with AC Power (CabLite® VR w/
Dimming and Emergency)
1) Check connection between control board and first downlight.
a) Replace cable if necessary
2) Check for correct voltage (12 or 24VDC) at pins 7 and 8 (+EM-) output.
a) If correct voltage is present replace 8' cable
b) If no or incorrect voltage present replace emergency control board.
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com P a g e | 16