Table of Contents
Advertisement
Cablite® VR LED Lighting System Installation Manual Rev 2.1
7.3 VR2.75 Downlight Dimensions
Figure 5 - VR2.75 Downlight Dimensions
7.4 Installation Diagram
A minimum of 1-inch clearance is required between the top of the can and top of car as shown in Figure 6
- Installation example. Be sure to leave a minimum 6-inch service loop at each downlight for inside cab
access of LED assembly replacement. Refer to section 8 LED Replacement.
Figure 6 - Installation example
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com
P a g e
| 11
Advertisement
Table of Contents
