Table of Contents
Advertisement
Cablite® VR LED Lighting System Installation Manual Rev 2.1
Locate the positions where you want each downlight and drill the ceiling panels according to the
specifications for your downlight listed in sections 7.2 VR2.25 Downlight Dimensions and 7.3 VR2.75
Downlight Dimensions .
Be sure there is a minimum 1" clearance between the top of the downlight can and the cab
top to accommodate the connectors. See Figure 6 - Installation example
7.1 Downlight Identification
7.2 VR2.25 Downlight Dimensions
Figure 4 – VR 2.25 Downlight Dimensions
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com
P a g e
| 10
Advertisement
Table of Contents
