3Com Baseline 2848-SFP Plus User Manual page 22

22 C W
ONNECTING TO THE
To use Discovery to connect to the Web interface, do
the following:
1 On a computer that is connected to the Switch, insert
the CD-ROM into its CD drive.
Discovery should start automatically. If it does not start
automatically, go to the
CD-ROM, and then double-click
The Welcome screen of Discovery appears.
Figure 4 Welcome Screen of Discovery
2 If the computer has multiple network adapters, select
the adapter that connects the computer to the Switch,
and then click Next.
If the computer has only one adapter, click Next.
I
EB NTERFACE
folder on the
\Discovery
discovery.exe
Discovery searches the network for 3Com devices.
When detection is complete, the Discovered Devices
screen displays detected network devices.
Figure 5 Discovered Devices Screen
.
3 On the Discovered Devices screen, click Baseline Switch
2848-SFP Plus, and then click Next.
The Completing the 3Com Discovery Application screen
appears.
Click Finish.
4
The Web interface loads in your Web browser.