MOTOR/DAMPER
Rotor
Bolt
HINGE,
DAMPER
LGE Internal Use Only
DAMPER
1
Disassemble the back cover.
2
Remove the bolt.
3
Pull out the rotor.
1
Unscrew the 2 screws from the tub bracket.
2
Remove the 6 bolts on the stator.
3
Unplug the 1 connectors from the stator.
1
Disassemble the damper hinges from the tub
and base.
NOTE
If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
Copyright © 2016 ~ 2017 LG Electronics Inc. All rights
51
reserved. Only training and service purposes.