Advertisement
Performing A Dirac Live Room Calibration
For each measurement position Dirac Live will play a series of test tones through each of your
speakers in turn. Avoid moving around or making any noise while the test tones are playing.
You will see a screen like the one below while the test tones are playing.
After each set of test tones is completed you will see the screen below, where you will be shown
the results of the measurement that has just been completed, and you will have the opportunity
to perform more measurements, clear or repeat previous measurements, or
Proceed To Filter Design when the measurements are completed. We suggest that you perform
the full recommended set of measurements before proceeding.
Page 22
Advertisement
