Advertisement
Performing A Dirac Live Room Calibration
Volume Calibration - Microphone Gain
On the next screen you will set the Microphone Gain and Master Output levels.
The object of this setting is to set the Microphone Gain as high as possible while being careful
to avoid allowing the background noise in the room to interfere with the accuracy of our
measurements. So, while being as quiet as possible, raise the Mic Gain slider (the small black tab)
up until the meter bar to the right of the blue line reads close to but just below -30 dB. If the slider
reaches the top before the meter reads -30 dB then simply leave it set at the top.
Page 17
Advertisement
