18
C
1: P
HAPTER
RODUCT
Power Supply System
Cooling System
LEDs
Switch 4800G 48-Port
Appearance
O
VERVIEW
(1) RPS port
(3) Grounding screw
(5) Extended module slot 2
The Switch 4800G 24-Port SFP can adopt AC power input, or DC power input, or
both to provide backup.
AC power input
■
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60 Hz
Input voltage range: 90 VAC to 264 VAC, 47 Hz or 63 Hz
Only the RPS recommended by 3Com can be used for the Switch 4800G
24-Port SFP. The -48 VDC power supply in the equipment room cannot be used
directly. Otherwise, the device may be damaged.
DC power input
■
Rated voltage range: -52 VDC to -55 VDC
The Switch 4800G 24-Port SFP is equipped with six fans for heat dissipation.
The LEDs on the front panel of the Switch 4800G 24-Port SFP are the same as
those of the Switch 4800G PWR 24-Port. For details, see Table 5.
The Switch 4800G 48-Port provides twenty-four 1000Base-X SFP ports, eight
auto-sensing 10/100/1000Base-T Ethernet ports, and one console port on the
front panel, and two AC or DC power sockets and two extended module slots on
the rear panel.
Figure 13 shows the appearance of the Switch 4800G 48-Port.
Figure 13 Appearance of the Switch 4800G 48-Port
(2) AC power socket
(4) Extended module slot 1