Summary Of Hardware Features - 3Com 4500G Getting Started Manual

10 C 1: I
HAPTER NTRODUCING THE
Summary of
Hardware Features
S 4500G F
WITCH AMILY
The Switch 4500G series features the following advantages:
Providing full Gigabit speed access ports
■
Providing 10-Gigabit uplink ports
■
Supporting IPv4 hardware forwarding
■
Supporting jumbo frames
■
Supporting port security
■
Supporting link aggregation control protocol (LACP)
■
Supporting 256 VLANs
■
Supporting ACLs
■
Supporting port-based/flow-based mirroring
■
For information about using the software features of the Switch, refer to
the "Command Reference Guide" and the "Configuration Guide".
Table 2 summarizes the hardware features that are supported by the Switch
4500G.
Table 2 Hardware Features
Feature
Addresses
Auto-negotiation
Forwarding Modes
Duplex Modes
Auto MDI/MDIX
Flow Control
Traffic Prioritization
Ethernet, Fast Ethernet, and
Gigabit Ethernet Ports
Switch 4500G
Up to 8,000 supported
Supported on all ports
Store and Forward
Half and full duplex on all front panel ports
Supported on all ports. If fiber SFP transceivers are
used, Auto MDIX is not supported.
In full duplex operation all ports are supported.
The Switch 4500G ports are capable of receiving, but
not sending pause frames.
Supported (using the IEEE Std 802.ID, 1998 Edition):
Eight traffic queues per port
Auto-negotiating 10/100/1000BASE-T ports