18
C
1: I
HAPTER
NTRODUCING THE
Switch 4500G PWR
24-Port and 48-Port
Indicators
S
4500G F
WITCH
AMILY
Table 4 describes the
Ethernet Switch LEDs.
Table 4 Description on the LEDs of the Switch 4500G PWR 24-Port& 48-Port
Ethernet Switch
LED
Label
Mode LED
Mode
Power LED
PWR
Module LED
Module
(MOD)
Switch 4500G PWR 24-Port/Switch 4500G PWR 48-Port
Status
Rate mode
Green, ON
Duplex
Yellow, ON
mode
PoE mode
Green,
blinking (1 Hz)
Green, ON
Green, blinking (1 Hz)
Red, ON
Yellow, blinking (1 Hz)
OFF
Green, ON
Yellow, blinking
OFF
Description
The port status LEDs are
showing the port rate.
The port status LEDs are
showing the duplex mode of
the port.
The port status LEDs are
showing the PoE status of the
port.
The switch starts normally.
The system is performing
power-on self test (POST).
The POST fails the POST.
One or more ports fail the
POST.
The switch is powered off.
The module is installed and
operates normally.
The module is not supported
or is in trouble.
The module is not installed.
Need help?
Do you have a question about the 4500G and is the answer not in the manual?