Tightening Torque - Sony VPL-FHZ700L Service Manual

1-5. Tightening Torque

Tighten the each screw with the torque below.
n
. There are two types of tightening torques for the screw (B3 x 8) in this unit. Be careful not to apply the
wrong torque.
. There are two types of tightening torques for the screw (PSW3 x 8) in this unit. Be careful not to apply
the wrong torque.
. B3 x 5:
. B3 x 8 (for excluding QM board):
. B3 x 8 (QM board):
. BVTP3 x 12:
. BVTP3 x 10:
. BVTP3 x 12:
. P2.6 x 4:
. PWH TP3 x 8:
. PSW3 x 8 (for excluding LU base B):
. PSW3 x 8 (LU base B):
. PSW3 x 10:
. PSW4 x 16:
. PSW4 x 30:
. SP 4-4O UNC:
. Screw (with stopper):
When using the torque driver with the notation of cN.m, interpret it as follows.
Example: 0.8 N.m = 80 cN.m
1-4 (E)
0.80 ?0.12 N.m
0.80 ?0.12 N.m
0.50 ?0.10 N.m
0.80 ?0.12 N.m
0.80 ?0.12 N.m
0.80 ?0.12 N.m
0.19 ?0.02 N.m
0.80 ?0.12 N.m
0.80 ?0.12 N.m
1.20 ?0.18 N.m
0.80 ?0.12 N.m
1.40 ?0.18 N.m
1.20 ?0.18 N.m
0.80 ?0.12 N.m
0.80 ?0.12 N.m
VPL-FHZ700L