Table of Contents
Advertisement
Changing the Riding Mode
Press and hold the MODE/ENTER button (3) for
●
a long time.
The dedicated screen is displayed (Fig 76) where,
●
using buttons (1) and (2), it is possible to scroll
through the available Riding Modes and display
the parameters with the relevant set values.
Press the MODE/ENTER button (3) to confirm.
●
Select "Exit" and press MODE/ENTER button (3) to
quit the screen without making any changes.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
If speed is lower than or equal to 5 km/h (3 mph)
●
and throttle control is open, the message Close
throttle is displayed; the new Riding Mode is
confirmed and stored only when throttle control
is closed and then the main screen is displayed.
If speed is lower than or equal to 5 km/h (3 mph),
●
throttle control is closed but brakes are
actuated, the message Release brakes is
displayed. The new Riding Mode is confirmed
and stored only when brakes are released and
then the main screen is displayed.
If both of the above conditions occur, the
●
message "Close throttle and release brakes" is
98
1
2
SPORT
Engine High
TOURING
DTC 4
ENDURO
ABS 2
DWC 2
Exit
DQS Off
URBAN
3
Fig 75
0
km/h
Fig 76
Advertisement
Table of Contents
