Table of Contents
Advertisement
Setting
(continued)
Indoor unit (I/D) and Outdoor (O/D) unit are included in Air conditioner
(A/C unit).
The setting contents
described on pages 6 to
7 can be set on the main
menu.
Adaptor Setting
Press
1
.
4
5
Enter the time for the cloud adaptor to determine the
2
communication with the air conditioner has failed.
(Possible input range: 5 to 99 minutes)
Enter [Communication interval with A/C unit].
3
(Possible input range: 5 to 99 minutes)
Select either [enable] or [disable] for [Link No.1] and
4
[Link No.2] respectively.
Select [Minimum pulse input detection time setting].
5
(30ms,100ms)
6
Press
.
• Dialogue will be shown to confi rm restart.
To cancel
Press
.
• The input screen will be discarded, and go to the main menu.
Note
• Please take note of the input contents displayed when the OK
button is pressed.
7
Press
.
• The settings are
applied, and the
cloud adaptor
restarts.
Attention
• After a certain period of time, a login screen is displayed in the
web browser. Enter the user name and password again, and go
to the main menu.
1
3
2
6
7
6
Air Conditioner Setting
1
Press
.
1
Press
2
.
• Air conditioners connected to the cloud adaptor are detected, and
the A/C unit list is updated.
To change
the link no. to
display
Select the link
no. for
Check if the connected indoor units are all displayed,
3
and confi rm that the number of the connected outdoor
units and the number of detected units correspond
with each other.
If some of the indoor units are not displayed/
unexpected indoor units are displayed.
Check if wiring is properly done, or the address setting for air
conditioners is correct.
→After correction, redo from step 2.
4
Enter the central address.
To assign manually
Select the central address text
box of the indoor unit on the
[A/C Unit List] screen, and
enter it.
5
Press
.
• The input central address is applied to all the indoor units.
Attention
• Be sure to set the central
address for the indoor unit to
control and monitor using the
cloud adaptor.
Air Conditioner Test Operation
1
Check if
and
properly work.
2
Press
.
• Check if pressing the button switches the ON/OFF display in the
control fi eld of the corresponding indoor units and the ON/OFF
operation of the actual indoor units.
• Check all the indoor units for proper operation.
• Check the status while communicating over a radio device with
the PC operator.
3
Press
.
• The main menu is displayed.
• If [Confi rm central address] button is not pressed after changing
the central address, a confi rmation screen is displayed.
→Selecting [YES] discards the changed contents.
3
2
4
5
To assign automatically
Press
• Values that have been unused
within the same link no. are
input in the blank fi eld in
ascending order.
Note
• If the text box is blank or any
duplication is present between
main indoor units, an alarm is
displayed.
3
.
2
1
Advertisement
Table of Contents
