Bristan TO DSM C Fitting Instructions & Contents List

Bristan TO DSM C Fitting Instructions & Contents List

Torre deck sink mixer

Advertisement

AFTER CARE INSTRUCTIONS

Your fitting has been manufactured to a high quality finish therefore
should be treated with care to preserve its visible appearance. All
surface finishes will wear if not cleaned correctly, the recommended
and safest way to clean your fitting is to wipe with a soft damp cloth.
Stains can be removed using washing up liquid. All domestic
cleaning products, including non-scratch cleaners, can damage the
surface and appearance of your fitting.

GUARANTEE

All products are manufactured to the highest standards and a 5 year
guarantee covers any defect in manufacture.
NOTE: The 5-year guarantee on the valve is invalidated if
damaged by any waterborne debris.
In the interest of continuous product development we reserve the
right to alter specifications as necessary
PRODUCT CODE: TO DSM C
TELEPHONE HELPLINE
Bristan Group Ltd
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
A Masco Company
Website: www.bristan.com
Telephone: 0844 701 6274
Facsimile: 0844 701 6275
Email: enquire@bristan.com
(FI TO DSM)
.
0844 701 6273
:
(D2)
Torre
Deck Sink Mixer
Fitting Instructions
& Contents List
Please keep these instructions for future reference
and request of replacement parts.
(H)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TO DSM C and is the answer not in the manual?

Questions and answers

Summary of Contents for Bristan TO DSM C

  • Page 1 Torre damaged by any waterborne debris. Deck Sink Mixer In the interest of continuous product development we reserve the right to alter specifications as necessary PRODUCT CODE: TO DSM C TELEPHONE HELPLINE 0844 701 6273 Bristan Group Ltd Fitting Instructions...
  • Page 2 WATER PRESSURE CONTENTS This mixer is suitable for use at all supply pressures. However for Spout (x1) optimum use both the hot and cold supplies should be reasonably Mixer Body (x1) balanced. If the fitting is installed at low pressure (tank fed), then the Plinth (x2) minimum distance from the outlet of the nozzle to the underside of...

Table of Contents