Saxby Lighting Sirio 75505 Instruction Leaflet

Commissioning
• Ensure that the product is sitting properly on the
suspended ceiling frame (See Fig. 4). Replace any
other ceiling tiles.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Fitting/replacing bulbs
• The LEDs in this product are non replaceable.
• We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the
finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning.
Accessories Available
Daylight Harvest Sensor - 74258
• Only for use with 75505/75506/75507/75512/75515
• This sensor will allow the light output to actively change depending on how bright the
surrounding space is.
• To fit this sensor, the magnetic cover on the back of the Sirio will need to be removed
and replaced with the sensor. Detailed instructions will be included with 74258
Surface Mount Kit - 75519/75520/75521
• 75519 - for use with 75505/75506/75507
• 75520 - for use with 75509
• 75521 - for use with 75512/75515
• This kit will allow the panels to be mounted to the ceiling when not being used in a
suspended ceiling.
Suspension Kit - 75518
• This kit will allow the panels to be suspended up to 1 metre from the ceiling.
www.saxbylighting.com
Fig. 4
Iss.2 25012018
Saxby Lighting,. BH23 3PE
Instruction leaflet
Sirio Recessed
75505, 75506, 75507, 75509, 75512, 75515