Page 1
Part No. 290A005-509 Rev 0 Any additional copies of the manual shall be ordered from ACP. No changes or modifications shall be made to the manual without prior review and written authorization from ACP. No authorization is given to market, sell, disclose, or exploit this manual except as for purposes of using the equipment as contemplated by the Purchase or Lease Agreement.
Page 3
ACP is internationally recognized for its contribution to research in the development of medical applications for therapeutic rehabilitation. The company sponsors and conducts research at leading health care institutions and major universities throughout the world.
The OmniStand™ is intended for use in attended exercise and is suitable for assisted exercise as well as active therapeutic exercise. It can be used to facilitate improvements in balance and core strength.
Precautions The OmniStand™ should always be positioned so the exerciser’s face is clearly visible to the therapist or operator to enable ongoing assessment of the exerciser’s effort and exercise tolerance. The system should never be positioned in a way that the exerciser’s condition/status cannot be appropriately monitored while using the system.
Review and understand the proper use of the device controls and proper setup, features, and adjustment requirements of the OmniStand™. A member of your ACP team will install and configure the device before training. ACP will conduct a train-the- trainer style education process when the OmniStand™ is delivered. ...
The OmniStand™ is equipped with wheels for ease of movement. However, the wheels are not suitable for moving the unit over uneven surfaces. The OmniStand™ should be moved using an elevator and must not be carried up or down stairs. To move the unit, unlock the wheels and push it in front of you.
OMNISTAND™ USER MANUAL Controls and Functions A. Upper pipe frame B. Stay tube C. Abdominal cushion D. Vertical pipe of balance unit E. Release lever for dynamic standing function F. Height adjustment of simple knee support G. Transport castors with brake H.
Inform supplier or forwarding agent immediately about any damage Exercise Program Planning The frequency and duration of exercise sessions on the OmniStand™ should be individually planned based on each exerciser’s health profile, status, and condition. Proper exerciser-specific exercise dosing with the OmniStand™ is extremely important if improvements in balance, mobility, strength, cardiovascular performance, and endurance are to be achieved.
Note: The simple knee support provides support for the user when rising and standing or during balance exercise. Adjusting the simple knee support does not require any tools. In order to be able to lower the user quickly, put a chair or wheelchair directly behind the OmniStand™ during the training session.
Page 14
Caution Do not use the OmniStand™ without a pelvic safety strap. Note: Use OmniStand™ exclusively with pelvic safety strap. The pelvic safety strap safely supports the user's pelvis in the back. Premium Pelvic Safety Strap - Position the user in an optimal training position: ...
Page 15
Lift OmniStand™ by upper pipe frame on left and right side. If it is possible to remove the vertical pipe from the balance unit, then training with the OmniStand™ is not allowed. Contact ACP Customer Service. Set release lever N to 2, 1 or 0 on both vertical pipes. Make sure that release lever latches in.
Page 16
Always position chair/wheelchair directly behind exerciser Caution Lock brakes of wheelchair Note: When using the OmniStand™ it may be necessary to lift or lower the exerciser with the help of an assistant who is trained for the procedure. To lift the user: ...
After each use, clean common contact surfaces, such as the display screen, with ACP germicidal wipes. With a second ACP germicidal cloth, wipe again leaving surfaces wet for at least 5 minutes. Allow the surface to air dry before patient use.
Always keep the system clean and keep any debris, such as paper, string, cloth, or clothing away from the moving parts. Replacing the Balance Unit: According to the manufacturer’s specifications, the balance unit of the OmniStand™ must be replaced after five years. Replacing the Pelvic Safety Strap: ...
OMNISTAND™ USER MANUAL Infection Control Supplies ITEM ITEM NO. DESCRIPTION Barrier Film for Surfaces, Infection Control, 52479 4” x 6” perforated sheets – 1200 sheets/roll Barrier Film for Surfaces, Infection Control, 66431 6” x 9” perforated Sheets – 800 sheets/roll...
Standard Limited Product Warranty. Buyer is responsible for shipping cost associated with sending the Equipment to the ACP Service Center. ACP shall ship Equipment to Buyer after repair at no cost to the Buyer provided repair is deemed to be under warranty.
Page 23
OMNISTAND™ USER MANUAL ACP is not responsible for any loss or damage to the Equipment prior to receipt at the ACP Service Center. Equipment returned for warranty service must be shipped complete with all accessories (except for manuals), in its original packing or equivalent so as not to be damaged while in transit.