Bios Introduction - C&T Solution VCO-6131E-4M2 User Manual

Chapter 4: BIOS Setup

4.1 BIOS Introduction

The BIOS provides an interface to modify the configuration. When the battery is removed, all the
parameters will be reset.
BIOS Setup
Power on the embedded system and by pressing <Del> immediately allows you to enter the
setup screens. If the message disappears before you respond and you still wish to enter the
Setup, restart the system by turning it OFF and ON or pressing the RESET button.
You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
<→> <←>
<↑> <↓>
<Enter>
<Page Up/+>
<Page Down/->
<F1>
<F2>
<F3>
<F4>
<Tab>
<Esc>
Main Setup
The main menu lists the setup functions you can make changes to. You can use the arrow keys
( ↑↓ ) to select the item. The on-line description of the highlighted setup function is displayed
at the bottom of the screen.
General Help <F1>
The BIOS setup program provides a General Help screen. You can call up this screen from any
menu by simply pressing <F1>. The Help screen lists the appropriate keys to use and the possible
selections for the highlighted item. Press <Esc> to exit the Help screen.
Control Keys
Select Screen
Select Item
Select
Increases the numeric value or makes changes
Decreases the numeric value or makes changes
General Help
Previous Value
Load Optimized Defaults
Save Configuration and Exit
Select Setup Fields
Exit BIOS Setup
VCO-6131E-4M2 l User's Manual
89