Advertisement
The Bluetooth speaker is turning off by itself while using the AC power adapter.The
Bluetooth speaker is equipped with an automatic standby function. Automatic standby
enables the unit to enter standby mode automatically when there are no operations or
audio signal output for about 15 - 20
Sound issues when using the Bluetooth speaker.Follow the troubleshooting steps below if
your Bluetooth® speaker is having any of the following sound issue: No Sound Low
Sound Sound from only one speaker NOTE: Because each of these steps represents a
possible
Unable to operate the Bluetooth speaker..Check that this system is turned on. If the
POWER/HOLD switch is set to HOLD, slide it to the center. If you are still unable
to operate the Bluetooth® speaker, press the RESET button found on the left side of
Check my service & repair job statusTo check and track your repair / service job status,
visit to the following: https://web.sony-asia.com/in/track-repair/
What is NFC?Near Field Communication (NFC) is a standards-based connectivity
technology that makes it more convenient to make transactions, exchange digital content
and connect devices. It is a technology enabling short-range
Repair & Service related FAQs
How to resolve when the unit does not work properly with the battery?Follow these steps
and use the battery in the right way. Confirm whether to be installed the battery in a
correct direction. The batteries might be run out. Replace them all with new ones. The
Manganese batteries
Advertisement
