Automatic Placement - Quectel LCC Series User Manual

LCC/LGA Module Series
Module Secondary SMT User Guide
For tape and reel packed modules, there is a need to set the feeding spacing according to actual
conditions.

4.3.2. Automatic Placement

Select a suitable nozzle according to the module size. To keep module's stability, please ensure that the
nozzle is placed in the center of gravity, image detection and recognition are 100% passed, and keep a
medium speed when mounting the module. After the module is placed onto the motherboard, the module
pads should be in alignment with the corresponding solder paste on the motherboard's pads. The triangle
mark on the module indicates its first pin, which should correspond to the mark on PCB.
Figure 4: Automatic Placement
Figure 5: First Pin and Mounted Picture
Module_Secondary_SMT_User_Guide 19 / 25