Kenwood XD-855 Instruction Manual page 20

Backup function :
The backup function protects all station presets for
a few hours should there be a power failure or the
AC power cord is removed from the AC socket.
20 EN
Preset tuning
You can store up to 40 stations in memory (40 sta-
tions consisting of any combination of FM and AM
stations you like) and recall them at the push of a
button.
To enter stations into memory :
1 1
Perform steps
(page 19).
2
Press the MEMORY/SET button.
•
"PGM" and the preset channel number will flash.
3
Within 30 seconds, press the P. CALL (4 1
or ¡ ¢) button to make the preset channel
number flash in the display.
•
The order of the station stored in memory, starts
with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET
button to store that station in the selected sta-
tion preset number memory.
•
If the "PGM" and preset number go out before
the station is memorized, repeat the operation
2
from step .
5 1 - 4
Repeat steps
tions, or to change a preset station.
•
When a new station is stored in the selected
station preset number memory, the previous
stored contents will be erased.
•
To store an RDS station in memory, perform
2 - 4
steps whilst the RDS station name is
being displayed. (For UK and Europe only)
To recall a memorized station :
Press the P. CALL (4 1 or ¡ ¢) button for
less than 0.5 second to select the desired station.
• The stations (preset channel number, frequency
band) which have been stored in memory will
appear in the display in numerical order, irrespec-
tive of the frequency bands.
Notes :
• When searching for a memorized station, do not
press the P. CALL (4 1 or ¡ ¢) for
more than 0.5 second.
• When the P. CALL (4 1 or ¡ ¢) button
is pressed for more than 0.5 second, the unit
will enter the preset memory scan mode.
6
- in the "Tuning" section
to set other preset sta-