Kenwood XD-855 Instruction Manual page 16

16 EN
Random play
(Remote control operation)
The tracks on the disc(s) can be played in random
order automatically.
1
Load a disc(s) and close the disc tray.
2
Press the RANDOM button to begin random play.
•
"RDM" will light up on the display.
Notes :
• If you press the P. CALL ¡ ¢ button during
random play, you can move to another track. On
the other hand, the P. CALL 4 1 button does
not allow you to move to the previous track. The
beginning of the track being played will be
located.
• When using random play, be sure to press the
7 STOP button after you are through listening.
Otherwise, the disc(s) will play continuously.
• In random play the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
To cancel random play :
Press the 3 button.
Tracks Skipping
Tracks skipping will automatically locate the begin-
ning of any track.
To listen again to the track being
played :
Press the P. CALL 4 1 button for less than 0.5
second during playback.
To move to the beginning of the next
track :
Press the P. CALL ¡ ¢ button for less than 0.5
second during playback.
• To skip a number of tracks at one time, press
the P. CALL 4 1 or ¡ ¢ button repeat-
edly until the desired track number is shown.
• To start playback from a desired track, press the
P. CALL 4 1 or ¡ ¢ button whilst in
the stop mode to select the track number, and
then press the 3 button.
Note :
Tracks skipping can only search for music on a sin-
gle disc.