Changing Initial Setup [3 Menu Language]; Changing Initial Setup [4 On-Screen Messages] - Kenwood DV-S701 Instruction Manual

Changing initial setup [3 Menu Language]

48
1
Perform steps 1 and 2 of the procedure in "Basic operation for changing the initial
setup".
2
Select the item to be set.
RC
1 Select an item with the cursor (%, fi) keys.
2 Press the ENTER key.
ENTER
The setup completes and the initial setup screen appears
again.
To return to the previous menu screen
Press the RETURN key.

Changing initial setup [4 On-Screen Messages]

1
Perform steps 1 and 2 of the procedure in "Basic operation for changing the initial
setup".
2
Select the item to be set.
RC
1 Select an item with the cursor (%, fi) keys.
2 Press the ENTER key.
ENTER
The setup completes and the initial setup screen appears
again.
To return to the previous menu screen
Press the RETURN key.
GRC
ENTER
Enter
ENTER
GRC
ENTER
Enter
ENTER
Select the language
for these Menus.
1 English
2 Français
3 Deutsch
4 Italiano
5 Español
Press RETURN to cancel
Each press of the cursor (%, fi) key switches the items as
follows.
1 1 English
2 2 Français
3 3 Deutsch
4 4 Italiano
5 5 Español
To exit initial setup
Select "0 Exit" in the initial setup screen.
On-Screen Messages
1 On
2 Off
Press RETURN to cancel
Each press of the cursor (%, fi) key switches the items as
follows.
1 1 On
2 2 Off
To exit initial setup
Select "0 Exit" in the initial setup screen.
Changing the initial setup
DV-S701 (En/E)
r
r